MIC-3396 CompactPCI 6U 刀片计算机 | 研华Advantech
MIC-3396刀片使用基于22nm处理技术的第四代Intel®Core™i3/i5/i7处理器,在2.4GHz和6MB末级缓存下最多支持四核/八线程,部署新的虚拟化、技术和CPU增强功能,从而提高计算性能。
暂时没有
本公司将快速将货物派送到您手中。
支持第四代Intel®Core™i3/i5/i7处理器和Intel®QM87 PCH,集成显示控制器支持独立三显
最高支持16GB(DDR3 1600)低压ECC内存(最大8GB板载,插座SO-UDIMM x1,最大8GB)
优化的单插槽SBC,带2.5"SATA-III HDD/CFast插槽/板上闪存(可选)
板载两个SATA端口、一个USB 3.0、四个USB 2.0端口、两个DVI端口、两个RS-232端口、一个PS/2连接器和到后传输模块(RTM)的PCIe x8接口
支持五个千兆以太网端口,包括两个PICMG 2.16端口
兼容PICMG 2.16 R1.0、PICMG 2.1 R2.0、PICMG 2.6 R1.0
MIC-3396 Product Features
Support for fourth generation Intel ® Core ™ I3/i5/i7 processor and Intel ® QM87 PCH, Integrated Display Controller supports independent triple display
Up to 16GB (DDR3 1600) low voltage ECC memory (maximum 8GB onboard, socket SO-UDIMM x1, maximum 8GB)
Optimized single slot SBC with 2.5 "SATA-III HDD/CFast slot/board flash memory (optional)
On-board two SATA ports, one USB 3.0, four USB 2.0 ports, two DVI ports, two RS-232 ports, one PS/2 connector and PCIE X8 interface for Back-to-Back Transfer Module (RTM)
Supports five Gigabit Ethernet ports, including two PICMG 2.16 ports
Compatible with PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0
MIC-3396 Product Photo