AMAX-3285IO-AE 8轴 EtherCAT运动从站模块 | 研华Advantech
255 x 141 x 60 mm研华AMAX-3285IO-AE，具有 16DI/16DO 扩展的高级 8 轴 EtherCAT 运动从站模块，支持运动插补、轴同步和连续轮廓。能够将带有 CW/CCW 和脉冲/方向接口的步进电机驱动器和伺服电机驱动器连接到由 Advantech EtherCAT master PCI-1203 控制的 EtherCAT 网络，通过转舵机转接线，可方便地连接三菱 J3/J4、安世 Sigma V/7、松下 A4/A5 舵机。
AMAX-3285IO-AE 8轴 EtherCAT运动从站模块中文产品特点：
最大限度。5 MHz，8轴脉冲输出
4xAB 模式的编码器输入为 10 MHz，CW/CCW 模式的编码器输入为 2.5 MHz
BoardID 可切换
板上易于查看的 LED 指示灯可进行诊断
直接接线到伺服驱动器，以节省安装时的端子板空间
伺服或步进电机驱动器的水平安装
适用于 DIN 导轨安装
可编程中断
DSP中设计的用于轨迹规划的内存缓冲区（10K点）
2轴位置比较触发高达100KHz，内存缓冲高达100K点
位置闩锁
通过半闭环脉冲列控制支持龙门模式
RDY/LTC专用输入通道&SVON/CMP/CAM-DO/ERC专用
输出通道可切换用于一般输入和输出目的
AMAX-3285IO-AE English product features of 8-axis EtherCAT motion slave module：
Max. 5 MHz, 8-axis pulse output
Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
BoardID is switchable
Easily visible LED indicators on board to do diagnosis
Direct wire to servo drive to save terminal board space while installation
Horizontal installation for for servo or stepping motor driver
Suitable for DIN-rail mounting
Programmable interrupt
Memory buffer (10K points) for trajectory planning which is designed in DSP
2-axis position compare triggering up to 100 KHz, and memory buffer is up to 100 K points
Position latch
Supports gantry mode by semi-closed loop pulse train control
RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated
Output channels are switchable for general input and output purposes
AMAX-3285IO-AE Product picture：